CRONYX :: Multiplexer-Crossconnector E1-DXC

English

Russian

Multiplexer-Crossconnector E1-DXC

Specifications
Documentation

Features:

Four E1 ports
Synchronous V.35/RS-530/RS-449/RS-232 or Ethernet interface (optional)
ITU G.703, G.704, G.706 and G.823 compliant
Up to 1.5 km
CAS and CRC4 framing
128 x 128 non-blocking switching matrix
Sa bits translation
Clock sources: Internal oscillator, E1 receiver or synchronous port
Master & backup clock sources
Asynchronous mode for RS-232 interface
Digital and line loopbacks
Integrated HDLC buffer
Integrated BER tester
Supervisory RS-232 port
Dry contacts alarm interface
AC or DC power
Upgradeable firmware
Certificate N OS-2-SP-1638

The E1-DXC device has four E1 interfaces. One E1 port can be replaced with serial (V.35, RS-530, RS-232, X.21) or Eternet interface. The E1-DXC provides n*64 Kbps (n = 1-31) cross-connect between any ports.

The device is available as a stand-alone desk-top unit and can be AC (220V) or DC (60V) powered.

There is a choice of V.35, RS-530, RS-232, X.21 with the standard connectors or multi-standard digital interfaces. The multi-standard interface is switchable by adapter cable to RS-232, RS-530, RS-449 or V.35 standards.

The device setup and diagnostic mode control are performed via the RS-232 supervisory port.

Currently available models are listed in Prices. Please, contact technical support if you are unsure which model to choose.

Specifications

Digital Interface
Data Transfer Rate	up to 1984 kbps (Nx64 kbps)
Clock Options Supported	TXC, RXC, ETC, ERC
Modem Control Signals	DTR, DSR, CTS, RTS, CD
E1 Interfaces
Line Code	HDB3
Line Impedance	120 Ohm (Twisted Pair) or 75 Ohm (Coax Cable), Switches selectable
Receive Signal Attenuation Range	from 0 to 30 dB (up to 1.5 km of 22 AWG twisted-pair cable)
Jitter Attenuator	In either the receive or the transmit path, programmable for 120UIpp attenuation
Frame Structure	per G.704
Multiframes	CRC4, CAS
Frequency Offsets Adjustment	Controlled Frame Slip
Alarm Interface
Connector Type	6-pins Mini DIN (female)
Relay Contact Current	up to 250 ma
Relay Contact Voltage	up to 175 VDC
Supervisory Port
Interface Type	RS-232
Serial Protocol	asynchronous 9600 bps, 8N1
Connector	DB-9 (female)
Diagnostics
Loopbacks	Digital (for models with digital interface) and Line Loops, activated via supervisory port
BER Tester	Activated via supervisory port

Documentation

Some of the documents are in Adobe® Acrobat® Reader® format

User's Manual in Russian
User's Manual in English
Справочник по интерфейсным кабелям Cronyx.

Return to Digital Service Access Devices or Digital Communication Equipment