**************************************************************************** Cronyx E1L/M-DAHDI State: Normal E1 Port: Sync=Int, High gain, HDB3, TS16=CCS, CRC4=Check, Mon=Off, Ok Ethernet: 100Base-T, Full duplex, Ok E1 Port: 1) Transmit clock: Internal 2) E1 mode: CCS 3) Crc4: Generate and check 4) Receiver gain: High 5) Monitoring channel bit: Off 6) Action on LOS/LOF: Remote Alarm 7) Line code: HDB3 8) Remote control: Disabled **************************************************************************** State: Normal E1 Port: Sync=Int, High gain, HDB3, TS16=CCS, CRC4=Check, Mon=Off, Ok Ethernet: 100Base-T, Full duplex, Ok Ethernet: *) MAC address: 00:09:94:00:76:XX 1) Buffer size: 32 ms 2) Mode: Eth 3) DAHDI MAC address: 00:e0:4c:XX:XX:XX 4) IP address/netmask: 10.1.1.1 / 24 5) Gateway IP address: 10.1.1.254 6) Negotiation: Automatic